BOPP No-primer Matte Thermal Lamination Film
Product Description：
Thermal Lamination Films have extrusion-coated surface with low temperature melting resin, which enables the lamination of film to paper products by heat and pressure. Various surface finishes available add value to the printed surface.
This product is a kind of pollution-free, strong viscosity and environment-friendly laminating material. There will be a layer of thin and transparent plastic film on the surface of press products after laminating, which will greatly increase the gloss and fastness also prolong the service life of the products, still has protection in waterproof, anti-fouling, wear-resisting and folding. Press product after laminating will be better in brightness and texture, and that press product laminated with both side corona thermal film can be printed or secondary processing. Besides, no primer film can decrease the coating sticking compare with the normal thermal film.
Feature:
1.Good matting effect;
2.Improving the color saturation;
3.Excellent resistance to tear & elongation.
Specification:
Items | Test Methods | Unit | Data | |
Total Thickness | GB/T 6672 | µm | 17-30 | |
Average thickness deviation | % | <1.4 | ||
Max/Min thickness deviation | <6/<6 | |||
Tensile strength | GB/T 1040 | MPa | MD | <120 |
TD | <210 | |||
Broken elongation | % | MD | <175 | |
TD | <50 | |||
Heat shrinkage | 105℃，30s | % | MD | ≦2 |
TD | ≦0.5 | |||
Surface tension | GB/T14216 | mN/m | Substrate | ≦38 |
Coating | ≦48 | |||
Haze | GB/T2410 | % | <5 | |
Friction coefficient | GB 10006 | film/film | <0.4 | |
Packing & Storage:
1. Two packing ways: Simple packing & Carton box packing;
2. Keep upright in a clean, dry and ventilated warehouse; avoid storage in direct sunlight or near sources of heat less than 2m;
3. In order to avoid damage to the film surface or end surface, avoid collision during product transportation, loading and unloading process;
4. When used the thermal laminating film in winter, should put the film and laminating substrate in the operating room, balance the temperature higher than 18℃and then processed.
Using Tips:
1. Laminating equipment: thermal laminating machine;
2. Temperature: 85-110℃;
3. Pressure: 10-20MPa;
4. Speed: 10-70m/min;
5. Adjust the processing parameter according to the production job requirement;
6. It is advised that the printed surface is well dried before lamination and cools sufficiently one surface before laminating to other surface;
7. Shelf life: 12 months.
